Copper Compression Cable Lug According To DIN 46235 With 2 Palm Holes

Description

For circular stranded copper conductors according to DIN 48201 and circular stranded/sector-shaped stranded copper conductors according to DIN 57295.

Material

E-Cu, DIN 40500/2, F-25

Surface:

Tin-plated. Sector shaped conductors must be rounded with special dies. Additional sizes on inquiry. These cable lugs also available with 1 oblong hole and 1 circular hole or with 2 oblong holes and with different hole centre distances.

Cat. No.	Ref.	Conductor Dimensions		Dimensions mm				Die Code No.	Number of Compressions		Weight 100 Pcs. Kg. (Approx.)
		Diameter ֳ˜ mm		d1	l1	l2	d		mech	hydr
		DIN 57295	DIN 48201/1
101302245	16x8x2
101302250	25x8x2
101302251	25x10x2	5.6-6.5	6.3	7.0	38	25	10.5	10	2		2.3
101302257	35x8x2
101302258	35x10x2	6.6-7.5	7.5	8.2	42	25	10.5	12	2		4.1
101302292	50x8x2
101302261	50x10x2	7.7-8.6	9.0	10	52	25	10.5	14	3	1	6.5
101302262	50x13x2	7.7-8.6	9.0	10.0	52	50	13.0	14	3	1	8
101302265	70x8x2
101302264	70x10x2	9.3-10.2	10.5	11.5	55	25	10.5	16	3	1	8.6
101302266	70x13x2	9.3-10.2	10.5	11.5	55	50	13.0	16	3	1	7.6
101302268	95x10x2	11.0-12.0	12.5	13.5	65	25	10.5	18	4	2	14.9
101302269	95x13x2	11.0-12.0	12.5	13.5	65	50	13.0	18	4	2	14.9
101302270	95x17x2	11.0-12.0	12.5	13.5	65	50	17.0	18	4	2	14.9
101302271	120x10x2	12.5-13.5	14.0	15.5	70	25	10.5	20	4	2	17
101302272	120x13x2	12.5-13.5	14.0	15.5	70	50	13.0	20	4	2	17
101302273	120x17x2	12.5-13.5	14.0	15.5	70	50	17.0	20	4	2	17.9
101302274	150x10x2	13.9-15.0	15.7	17.0	75	25	10.5	22	4	2	25.4
101302275	150x13x2	13.9-15.0	15.7	17.0	75	50	13.0	22	4	2	25.4
101302276	150x17x2	13.9-15.0	15.7	17.0	75	50	17.0	22	4	2	25.4
101302278	185x13x2	15.5-16.8	17.5	19.0	82	50	13.0	25	5	2	28.5
101302279	185x17x2	15.5-16.8	17.5	19.0	82	50	17.0	25	5	2	28.5
101302281	240x13x2	17.8-19.2	20.2	21.5	90	50	13.0	28		2	38.2
101302282	240x17x2	17.8-19.2	20.2	21.5	90	50	17.0	28		2	38.2
101302284	300x13x2
101302284	300x17x2	20.0-21.6	22.5	24.5	100	50	17	32		2	53
101302286	400x13x2
101302286	400x17x2	22.9-24.6		26.0	115	50	17.0	38		3	104
101302288	500x13x2
101302289	500x17x2
101302298	625x13x2

User Instructions

The compression cable lugs are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number. For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper cable lugs, whereas aluminium cable lugs require electro-galvanized dies (white). For hydraulic compression tools there is no differentiation of dies for copper or aluminium cable lugs. The compression sleeve of aluminium cable lugs is pre-filled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off. Copper cable lugs are not pre-filled with compression compound. Assembly Instructions

1. Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
2. Insert conductor or cable ends into the compression sleeve up to the stop.
3. Before proceeding, make sure that the code number on the cable lug matches that on the compression die.
4. Cable lugs are compressed by starting from the plate end and working out toward the sleeve end. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.

Diagrams