Cu Full-Tension Compression Joint

Description

For full tension connections suitable for copper conductors according to DIN 48201.

Material:

E-Cu

Surface:

Uncoated

Cat. No. Conductor
Cross-Section
sq. mm Conductor
ֳ˜ mm Die
Code
No. Dimensions mm No. of
Compressions Weight
100 Pcs.
Kg.

D1 L mech hyd

101301045 6 3.00 5 3.80 65 04-Apr - 0.8

101301046 10 4.05 8 4.50 80 6-6 - 3.1

101301047 16 5.10 8 5.50 95 6-6 - 3.3

101301048 25 6.30 10 7.00 80 4-4 - 3.3

101301049 35 7.50 12 8.25 95 6-6 - 6.2

101301050 50 9.00 14 10.00 95 06-Jun - 9.1

101301051 70 10.50 16 11.50 95 06-Jun - 11.1

101301052 95 12.50 20 13.50 145 8-8 - 24

101301053 120 14.00 22 15.00 160 08-Aug 4-4 36.5

101301054 150 15.70 25 17.00 182 12-12 5-5 40.7

101301055 185 17.50 30 18.50 260 - 05-May 102.5

101301056 240 20.30 34 21.50 310 - 6-6 152

101301057 300 22.50 38 24.00 360 - 7-7 220

Cat. No.	Conductor Cross-Section sq. mm	Conductor ֳ˜ mm	Die Code No.	Dimensions mm	No. of Compressions	Weight 100 Pcs. Kg.

D1	L	mech	hyd
101301045	6	3.00	5	3.80	65	04-Apr	-	0.8
101301046	10	4.05	8	4.50	80	6-6	-	3.1
101301047	16	5.10	8	5.50	95	6-6	-	3.3
101301048	25	6.30	10	7.00	80	4-4	-	3.3
101301049	35	7.50	12	8.25	95	6-6	-	6.2
101301050	50	9.00	14	10.00	95	06-Jun	-	9.1
101301051	70	10.50	16	11.50	95	06-Jun	-	11.1
101301052	95	12.50	20	13.50	145	8-8	-	24
101301053	120	14.00	22	15.00	160	08-Aug	4-4	36.5
101301054	150	15.70	25	17.00	182	12-12	5-5	40.7
101301055	185	17.50	30	18.50	260	-	05-May	102.5
101301056	240	20.30	34	21.50	310	-	6-6	152
101301057	300	22.50	38	24.00	360	-	7-7	220

User Instructions:

The compression joints are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number. For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper, bronze and steel compression joints, whereas aluminium compression joints require electro-galvanized dies (white). For hydraulic compression tools there is no differentiation of dies for different metals. The compression sleeve non-tension and full-tension of aluminium compression joints and of full-tension copper compression joints are prefilled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off.

Assembly Instructions:

Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
Insert conductor or cable ends into the compression sleeve up to the centre.
Before proceeding, make sure that the code number on the compression joint is matched to that on the compression die.
Compression joints are compressed by making the first compression at the centre and working out toward the ends. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.