Aluminium Compression Cable Lug According To DIN 46329 For Sectorial Conductors

Description

Longitudinally sealed. For sectorial aluminium conductors.

Material:

Al 99.5

Surface:

Tin-plated, 20 micron. Al compression cable lugs are pre-filled with compression compound and sealed with plastic caps. Advantages

Round-forming of sector-shaped conductors is not necessary.
Defined contact-making by longitudinal grooves.
Shorter size, less compression points per terminal.

The design of these cable lugs takes the internationally applied sector shapes into account. 4-conductor cable types (illustration 3) with a sector shape of 90° fit into three positions of the profiled channels and the 3-conductor cable types (illustration 2) with a 120° sector shape fit into two positions of the profiled channels.

Cat. No. Conductor Cross Section Die Code
No. Dimensions Weight 100 Pcs.
Kg. No. of units (in a box)

SM Strand. SE Solid d1 d2 l

101304909 25X8 8 50

101304910 25X10 10 50

101304911 35X10 50 16 10.5 24 70 2.5 50

101304913 50X10 70 18 10.5 24 70 3.0 50

101304914 50X13 13 50

101304915 70X10 10 50

101304916 70X13 95 22 13 24 70 6.0 50

101304917 95X10 10 50

101304918 95X13 120 22 13 30 74 5.5 50

101304920 120X10 10 50

101304921 120X13 150 25 13 30 74 6.5 50

101304922 120X17 17 50

101304923 150X13 13 50

101304924 150X17 185 27 13 30 88 7 50

101304925 185X13 13 50

101304926 185X17 240 32 17 37 97 11 50

101304927 240X13 13 50

101304928 240X17 300 34 17 37 97 13.5 50

Cat. No.	Conductor Cross Section	Die Code No.	Dimensions	Weight 100 Pcs. Kg.	No. of units (in a box)
	SM Strand.	SE Solid		d1	d2	l
101304909	25X8			8				50
101304910	25X10			10				50
101304911	35X10	50	16	10.5	24	70	2.5	50
101304913	50X10	70	18	10.5	24	70	3.0	50
101304914	50X13			13				50
101304915	70X10			10				50
101304916	70X13	95	22	13	24	70	6.0	50
101304917	95X10			10				50
101304918	95X13	120	22	13	30	74	5.5	50
101304920	120X10			10				50
101304921	120X13	150	25	13	30	74	6.5	50
101304922	120X17			17				50
101304923	150X13			13				50
101304924	150X17	185	27	13	30	88	7	50
101304925	185X13			13				50
101304926	185X17	240	32	17	37	97	11	50
101304927	240X13			13				50
101304928	240X17	300	34	17	37	97	13.5	50

User Instructions:

The compression cable lugs are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number. For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper cable lugs, whereas aluminium cable lugs require electro-galvanized dies (white). For hydraulic compression tools there is no differentiation of dies for copper or aluminium cable lugs. The compression sleeve of aluminium cable lugs is pre-filled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off. Copper cable lugs are not pre-filled with compression compound.

Assembly Instructions

Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
Insert conductor or cable ends into the compression sleeve up to the stop.
Before proceeding, make sure that the code number on the cable lug matches that on the compression die.
Cable lugs are compressed by starting from the plate end and working out toward the sleeve end. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.