Cu Non-Tension Compression Joint 30 kV According to DIN

Description

For high voltage with through-hole. For non-tension connections of high-voltage-copper cables. The compression joints are suitable for paper and plastic-insulated cables. They bear double markings and can be either round compressed or hexagonally compressed, depending on cable type and voltage level.

Material

E-Cu

Surface:

Uncoated.

Cat. No. Conductor
Cross Section Conductor Diameter
mm Die Code
No. Dimension mm Number of
Compressions Weight 100 Pcs.
Kg. (App.)

DIN 57295 hexag round hydr d l hexagonal round hydr

mech hyd

101305301 25 5.6-6.5 10
7.0 50 2-2 - 4.0

101305302 35
6.6-7.5 12 11 HR 8.2 50 2-2 - 3.6

101305303 50
7.7-8.6 14 12 HR 10.0 65 3-3 - 5.5

101305304 70 9.3-10.2 16 14 HR 11.5 65
3-3 - 7.1

101305305 95 11.0-12.0 18 16 HR 13.5 90 4-4 - 11.5

101305306 120 12.5-13.5 20 18 HR 15.5 90
- 2-2 12.9

101305307 150 13.9-15.0 22 21 HR 17.0 106
- 2-2 20.4

101305308 185 15.5-16.8 25 22 HR 19.0 106 - 2-2 22.3

101305309 240 17.8-19.2 28 25 HR 21.5 110 -
2-2 29.5

101305310 300 20.0-21.6 32 24.0 116
- 2-2 31.0

101305311 400

101305312 500

101305313 625

Cat. No.	Conductor Cross Section	Conductor Diameter mm	Die Code No.	Dimension mm	Number of Compressions	Weight 100 Pcs. Kg. (App.)

DIN 57295	hexag	round hydr	d	l	hexagonal	round hydr
mech	hyd
101305301	25	5.6-6.5	10		7.0	50	2-2	-	4.0
101305302	35	6.6-7.5	12	11 HR	8.2	50	2-2	-	3.6
101305303	50	7.7-8.6	14	12 HR	10.0	65	3-3	-	5.5
101305304	70	9.3-10.2	16	14 HR	11.5	65	3-3	-	7.1
101305305	95	11.0-12.0	18	16 HR	13.5	90	4-4	-	11.5
101305306	120	12.5-13.5	20	18 HR	15.5	90	-	2-2	12.9
101305307	150	13.9-15.0	22	21 HR	17.0	106	-	2-2	20.4
101305308	185	15.5-16.8	25	22 HR	19.0	106	-	2-2	22.3
101305309	240	17.8-19.2	28	25 HR	21.5	110	-	2-2	29.5
101305310	300	20.0-21.6	32		24.0	116	-	2-2	31.0
101305311	400
101305312	500
101305313	625

User Instructions:

The compression joints are marked with a code number in front of the logo (roughly corresponding to the outer diameter of the compression sleeve). The required compression die is selected in accordance with this code number. For hexagonal compressions made with hand-operated mechanical compression tools, browned dies (black) are to be used for copper, bronze and steel compression joints, whereas aluminium compression joints require electro-galvanized dies (white). For hydraulic compression tools there is no differentiation of dies for different metals. The compression sleeve non-tension and full-tension of aluminium compression joints and of full-tension copper compression joints are prefilled with compression compound which must not be removed before the compression, neither completely nor in part. Any compression compound escaping during the compression should be wiped off.

Assembly Instructions:

Clean the conductor or cable ends with a wire brush to remove dirt and oxidation.
Insert conductor or cable ends into the compression sleeve up to the centre.
Before proceeding, make sure that the code number on the compression joint is matched to that on the compression die.
Compression joints are compressed by making the first compression at the centre and working out toward the ends. The number of compressions is marked on the sleeve. It is important to make the specified number of compressions.