Description
For Al and ACSR conductorsMaterial
body:
Corrosion resistant, high strength aluminium alloy (AlMgSi1/Al6082).Bolts:
Steel, 8.8, two bolts according to DIN 933, hot-dip galvanised two bolts according to DIN 931 (BM), hot-dip galvanisedConical Washers:
Steel according to DIN 6796, corrosion-protected Corrugated jaw-clamps have been developed for full tension and current-carrying connections of aluminium and aluminium/steel. The corrugated clamp channels are additionally grooved and allow the connection of both equal and different conductor cross sections. All components of the clamp are captive. For installation, the clamp need not be disassembled. The (BM) bolts of the clamp are turned back up to the stop and subsequently the conductors are inserted from the side. If the clamps are installed as per instructions, the assemblies comply with all requirements of VDE 0210/0211 and OVE-L 11/1967. Minimum Torque Moments: M8 : 23Nm BM8 : 23Nm M10 : 46Nm BM10 : 46Nm M12 : 80Nm BM12 : 80Nm| Cat. No. | Conductors Cross-Section sq. mm | Conductor Diameter ײ³ֻmm | Dimension mm. | Bolts | Weight 100 Pcs. Kg. |
|||
|---|---|---|---|---|---|---|---|---|
| Al | ACSR | L | W | D | ||||
| 101330835 | 35-50 | 35/6-50/8 | 7.5-9.6 | 55.0 | 40.0 | 28.0 | 2xM8x65 2xBM8x50 | 20.9 |
| 101330836 | 70-120 | 70/12-95/15 | 10.5-14.0 | 70.0 | 51.0 | 38.0 | 2xM10x75 2xBM10x55 | 42.6 |
| 101332133 | 95-185 | 95/15-150/25 | 12.5-17.5 | 92.0 | 64.0 | 42.0 | 2xM12x100 2xBM12x65 | 70.4 |
Diagrams:
